Home / Boat brands / Hanse

Hanse rigging

Easy performance for your cruiser

Self-tacking jib, performance mast: get the most out of easy sailing.

Precise tuning for fast Judel/Vrolijk hulls.

Make your rig reliable and enjoy Hanse simplicity to the full.

Hanse Yachts: the revolution from the Baltic

Founded in 1990 in Greifswald, in the former East Germany, by Michael Schmidt, Hanse shook up the market with a simple idea: make fast sailing easy for everyone. Working from the start with America's Cup designers Judel/Vrolijk, Hanse created boats with formidable hulls that go fast without a big crew. Their signature: a standard self-tacking jib and lines led back to the helm. At A'gréement, we understand that philosophy: your Hanse should be simple to sail, and that simplicity depends on flawless engineering behind the scenes.

Handling a Hanse's power

Hanse sailboats often carry large mainsails to make up for the small self-tacking jib, which puts specific loads on the rig.

  • Self-tacking jib specialists: the track and single sheet of the self-tacking jib are the boat's nerve centre. We optimise the sheet lead (often prone to friction) and replace worn cars or tracks so the sail tacks without forcing.
  • Seldén and Z-Spars masts: depending on the year, Hanse fits masts from these two major makers. We have the technical access to replace like-for-like the hardware (goosenecks, sheave boxes) that suffers from high halyard loads.
  • High loads: on a Hanse, the mainsail does all the work, so the standing rigging and running rigging take heavy loads. Our team sizes your ropes (Dyneema core recommended) to avoid stretch and keep the boat fast in a breeze.
  • Mast rake: Judel/Vrolijk hulls are sensitive. A badly tuned mast, with too much or too little rake, makes the boat round up on its own and unpleasant to helm. We tune your mast to restore the balance the designer intended.

Questions from Hanse owners

My self-tacking jib sheet wears out very fast. Is that normal?

It is the system's Achilles heel: the single sheet works hard over one friction point at every tack. At A'gréement, we can offer sheets with a reinforced Technora or Dyneema cover on the working section, or rework the lead angle to limit premature wear.

When should I replace the standing rigging on my Hanse?

As for most production cruisers, between 10 and 15 years. But Hanses often sail heeled and load the cap shrouds heavily. Regular visual checks of the swaged terminals are advised, including at the turnbuckles hidden below deck on some models.

My Hanse has electric winches. Does that change maintenance?

Yes. With an electric winch you don't feel when something is binding, such as a jammed halyard or a seized car, and you can break a major part without noticing. We recommend an annual check of the whole sail-handling system to avoid a sudden failure under load.

Can the performance of my Hanse 315, 345 or 400 be improved?

Absolutely. These boats have huge speed potential, often held back by stretchy standard halyards. Replacing your main halyards with low-stretch rope transforms the boat: less heel, better pointing and less constant re-trimming.

A project on your Hanse?

Start with a rig inspection.

See the rig inspection