Bali 4.1, 4.6 or 5.4: enjoy your loft on the water safely.
Specialists in the structural loads of a solid foredeck.
Maintenance and tuning so you can sail with peace of mind.
Bali catamarans: the open-space revolution
Launched by the Catana group and its visionary Olivier Poncin, Bali broke every catamaran convention. By replacing the trampoline with a solid foredeck and inventing the tilting aft door, Bali created huge living spaces. Its rapid success has put thousands of boats on the water, many of them sailing hard. At A'gréement, we know the Catana DNA under these cruising boats and the specific mechanical loads created by their very stiff structure.
Dealing with a stiff platform
A Bali does not flex like a conventional catamaran with a trampoline. The platform is very stiff, so the rig has to absorb the shocks the structure does not.
- Martingale checks: this is the critical point. With the weight of the solid foredeck and forward lounge, the forward crossbeam and martingale (dolphin striker) take huge loads to stop the bow sagging. We rigorously check the tension and condition of the stainless wires at this key point.
- Self-tacking jib: almost every Bali has a self-tacking jib. The clew and the car travel a short distance but under a lot of load. We replace the control lines and sheaves so the system doesn't jam at the worst moment.
- Gooseneck access: on flybridge models the boom sits high, and owners often neglect the gooseneck because it is hard to reach. Our team goes up there to check that nothing is working loose from engine vibration or sailing.
- Lazy bags and covers: with these high booms, closing the lazy bag can be a sport. We can adapt or replace your closing systems and lazy jacks so you don't need to be an acrobat.
Maintaining your Bali catamaran
My Bali slams in a rough sea. Is it a risk for the mast?
A solid foredeck does slam more than a net, and those shocks travel up the forestay and the mast. That is why we recommend a "dynamic" rig tune, neither too tight nor too slack, to absorb the impacts without tiring the chainplates.
Does the tilting door get in the way of the rigging?
No, but it requires tidy lines and wires at the stern. During our visits we often check that the door's lines or the davit tackles don't chafe on the standing or running rigging.
Can I get more light-air performance?
Balis are heavy and comfortable, and they slow right down in light winds. The answer is a Code 0 on a furler. The bowsprit is often built into the hull on Balis, which makes it very strong. A'gréement fits the hardware you need to use this alternative to the engine easily.
How often should an ex-charter Bali be serviced?
Many Balis come out of charter fleets where they have sailed a lot. If you buy a used ex-charter Bali, replacing the standing rigging is often a condition for insurance. We offer charter refit packages to bring safety back to standard: shrouds, halyards and furler service.
A project on your Bali?
Start with a rig inspection.
