Home / Boat brands / Fountaine Pajot

Fountaine Pajot rigging

Performance and elegance for your catamaran

Lucia, Helia, Saona or Alegria: we look after your investment.

Technical expertise on Z-Spars and Soromap rigs.

Sail with confidence: maintenance and upgrades for offshore sailing.

Fountaine Pajot: boldness from La Rochelle

Founded in 1976 by Jean-François Fountaine, this iconic yard imposed its vision of the catamaran: seaworthy boats with flowing lines and efficient hulls. A pioneer of resin infusion to lighten hulls, Fountaine Pajot offers an ideal balance between comfort and sailing pleasure. Whether you sail a timeless Lipari 41 or a luxurious Aura 51, your boat deserves a rig maintained to the same quality standards it was built to.

Rigging matched to Fountaine Pajot's elegance

Fountaine Pajot catamarans are usually fitted as standard by Z-Spars (formerly Soromap), equipment we know thoroughly.

  • Semi-flybridge layouts: many models (such as the Helia 44 or Saona 47) have a raised helm station or a lounge deck, which makes the boom hard for the owner to reach. We fit and adjust reinforced lazy jacks and lazy bags so you can drop the mainsail without acrobatics.
  • Gooseneck inspection: a point to watch on these boats. The boom-to-mast joint takes heavy loads, especially downwind in a swell. We check for play in the pins and the condition of the nylon bushes to prevent any failure.
  • Easier sail handling: Fountaine Pajot deck layouts bring everything back to the helm, which creates a lot of friction in leads and clutches. We can replace your halyards with more technical ropes and service or replace the sheaves, so that hoisting the sail is no longer a workout.

Maintaining your Fountaine Pajot

My boat has a Z-Spars mast. Can you still get the parts?

Yes. Z-Spars is a standard supplier we work with every day. Whether for a worn masthead sheave, a creaking gooseneck or spreaders to check, we have access to the manufacturer's catalogue to replace parts like for like.

What weak point should I watch on an older Fountaine Pajot?

On models from the 2000s (Athena, Bahia, Lavezzi), keep a close eye on the forward crossbeam and the martingale. Galvanic corrosion can develop between the stainless wire and the aluminium beam. Regular inspection by a professional is essential to avoid a dismasting.

Can I fit a gennaker furler?

It is the number one upgrade our Fountaine Pajot clients ask for. These boats slip along well, and a gennaker or Code 0 boosts light-air performance. A'gréement fits the bowsprit if needed, the furler (Facnor, Karver or Profurl) and a sheet system you can handle alone or as a couple.

How often should the standing rigging be replaced?

The rule is the same as for all production multihulls: every 10 to 12 years for the best insurance cover. If your Fountaine Pajot is back from an Atlantic loop or has been chartered, we advise a rigorous inspection from 8 or 9 years.

A project on your Fountaine Pajot?

Start with a rig inspection.

See the rig inspection