Home / Guides / Cost of re-rigging
How much does it cost to replace sailboat rigging?
In short
- Replacing all the standing rigging on a cruising sailboat costs several thousand euros. At A'gréement, expect around €6,000 for a 35-foot sailboat, with a wide range depending on the boat.
- The price depends mainly on mast size, the number of wires, the material (stainless wire, rod, textile) and the terminals.
- Unstepping the mast (crane, yard) often comes on top, along with what is found once the mast is down: spreaders, fittings, electrical wiring.
- A planned replacement always costs much less than a dismasting at sea, which can take the mast and sails and damage the deck.
What a standing rigging replacement includes
A quote usually covers:
- the wires: shrouds, lowers, forestay, backstay, and diamonds on some catamarans;
- the terminals at the masthead and at deck level, swaged or mechanical;
- the turnbuckles, which are almost always replaced together with the wires;
- removing and refitting the headsail furler, since the forestay runs inside it;
- labour: measuring, making up, fitting and tuning the mast;
- unstepping and restepping, when the mast has to come down.
Unstepping is often invoiced separately by the yard or marina that provides the crane. Ask about it so that you compare like with like.
The 6 factors that change the price
| Factor | Why it matters |
|---|---|
| Boat size and mast height | More wire length, bigger diameters and more expensive parts. A mast with two or three sets of spreaders has more wires than a single-spreader rig. |
| Material | 1x19 stainless wire is the most common and most economical option. Rod and textile (Dyneema, PBO) cost more in material and fabrication. |
| Terminals and turnbuckles | Swaged terminals are the most common. Mechanical screw-on terminals cost more but can be refitted at sea, which appeals to long-distance sailors. Turnbuckles are replaced with the wires: their size and range weigh on the total. |
| Unstepping | Crane, yard time, possibly storage ashore. With the mast down, everything can be inspected. |
| Findings with the mast down | Corroded spreaders, cracked fittings, worn sheaves, damaged cables: this is the time to deal with them, but they add to the bill. |
| Type of boat | Catamarans often carry higher loads, larger wires and sometimes a rotating mast, which require specific parts. |
How to read and compare quotes
- Check the scope: are unstepping, the crane, the furler, the turnbuckles and final tuning included? A cheaper quote that keeps the old turnbuckles is not comparable.
- Look at the specifications: wire diameter and type, brand of terminals and turnbuckles. Two quotes at the same price are not worth the same if the parts differ.
- Ask how findings will be handled: a good quote says how problems found with the mast down will be dealt with before they are charged.
- Ask for a report: it helps with your insurance and when you sell the boat. Invoices for a recent, documented rig reassure a buyer.
How to keep the budget under control
- Plan ahead: a replacement planned off-season is easier to schedule and costs less than an urgent repair in mid-summer.
- Get an inspection before deciding: a rig inspection tells you where your rig stands and lets you plan the replacement at the right time, rather than in a hurry.
- Group the work: with the mast down, deal with the lights, VHF antenna, wiring and masthead sheaves at the same time. You only pay for one unstepping.
- Compare with the cost of a failure: a dismasting can take the mast and sails and damage the deck. On an older boat, the insurer may even decide the repair costs more than the boat is worth.
Our approach at A'gréement
We start with a rig inspection to find out what needs replacing. The quote details every item: wires, terminals, turnbuckles, furler, unstepping and tuning. Turnbuckles work as hard as the wires: except in rare cases, we replace them together. If we find a problem once the mast is down, we explain it with photos before doing any work.
To know when to replace your rigging and what your insurance requires, read our guide How long does rigging last, and what does insurance cover?
Frequently asked questions
Can rigging be replaced without unstepping the mast?
On some small sailboats, yes, wire by wire with the mast secured by halyards. But with the mast down you can inspect the masthead, fittings and spreaders and work in better conditions. On a cruising boat, it is usually the best option.
Is textile rigging more expensive than stainless steel?
Generally yes. It is lighter, but it needs specific terminals and often has a shorter lifespan. It makes most sense on performance boats.
Should turnbuckles be replaced together with the wires?
Yes, almost always. The turnbuckle carries the full load of the wire and ages at the same rate: metal fatigue, worn threads, hidden corrosion. Keeping old turnbuckles on new wires leaves the most tired link in the chain.
How long does the job take?
For a cruising sailboat, a few days between unstepping and restepping is usually enough once the parts are in. The timing depends mostly on crane and parts availability.
Does insurance pay for worn rigging?
No. Wear and tear is not a claim: preventive replacement is the owner's cost. But well-maintained, documented rigging protects your claim if there is an accident.
Sources
- Figaro Nautisme (French), "Haubans, étai, cadènes : ces pièces silencieuses à contrôler avant d'appareiller", July 2026: read
- Figaro Nautisme (French), "Refit hauturier : comment transformer une vieille carène en maison du bout du monde", May 2026: read
The amount quoted is an order of magnitude from our workshop. Only a quote for your boat gives a price.
Need a quote for your rigging?
We start with an inspection, then a detailed quote, item by item.
